Insta360 Invisible Dive Case For Insta360 X4 Camera
Main Feature :
- Complete invisible design, allowing for complete 360° shots underwater.
- Seamless underwater stitching.
- Waterproof to 164ft (50m).
- Crystal clear 360° video.
- Use with the Invisible Selfie Stick for awesome third-person views.
Film improved diving shots from deep below the surface of the water using this Invisible Dive Case from Insta360. Custom-fit to your X4 camera and designed to compensate for water refractions, the clear case maintains the visibility of your touchscreen and controls while ensuring seamless 360° video.
It is capable of being submerged up to 164'. A built-in 2-prong mount attaches the case to selfie sticks or mounts of your choice and can be adapted to a 1/4"-20 compatible thread with the included adapter.
Specifications :
Dimensions : 164.9 x 87.7 x 89.2mm
Maximum Depth : 50m
Weight : 155g
Insta360 Invisible Dive Case For Insta360 X4 Camera
- Do not open the Dive Case while it is wet.
- After using the product in seawater, take out X4 and soak the Dive Case in fresh water for at least 10 minutes (ensure the Dive Case is firmly closed beforehand). If the Dive Case is not rinsed after use in seawater, residual salt may crystalize in gaps. These salt crystals will not dissolve in water and can lift the rubber seal and cause water leakage. After soaking the Dive Case in fresh water, rinse it under gently flowing tap water. Never apply a strong water stream from a single direction, as it may cause water leakage.
- Ensure that the dive case is firmly closed before washing. After washing, wipe away any water droplets remaining on the surface with a soft, dry cloth and leave to dry. Ensure there is no sand on the Dive Case before drying as sand may scratch the product surface when wiped with a cloth. Do not dry with a hair dryer or any other heat source.
- Do not store the Dive Case in a hot or humid environment. For example, do not leave it inside a hot car.
- Do not wash the Dive Case with soap, neutral detergent, or alcohol cleaning products. This may degrade the waterproofing performance.
- Store the product in a dry, well-ventilated location.
1x Invisible Dive Case
12x Anti-fog Inserts
1x 3-Prong to 1/4" Adapter
1x 1/4" screw
1x Thumb Screw Wrench
1x Dive Case Carry Pouch
1x Lens Cloth
4x Stabilit Pads
